HomeRoast Digest


Topic: Need a Cory Vacuum Pot Rubber Gasket (5 msgs / 103 lines)
1) From: bemason
I am getting trmendous coffee brews in my new-to-me Cory Dripolater Vacuum
Pot...  Still, it's old, and the rubber gasket/seal will need to be
replaced soon.
I am asking the list - do you know of a supplier, online, or otherwise,
who provides these?
Thanks,
Brett Mason

2) From: Edward Spiegel
At 10:47 AM -0700 8/26/04, bemason wrote:
<Snip>
Hi,
I am in the same position. Apparently there is a still-in-production metal vacuum brewer whose gaskets fit the old corys (if yours was a wide mouth). I have been told -- but have not been able to confirm -- that restaurant supply houses that supply chinese restaurants are a source.
If anyone knows of a particular supply house that carries them that would be great.
Wish I knew more,
Edward

3) From: Barry Luterman
An alternative I took was to buy a Bodin Santos pot and use the Cory rod in
it. Works great.

4) From: Marty Wooten
I have also heard of using o-rings, but I have never tried this.

5) From: Dave Huddle
Have a look at http://www.foodservicedirect.com/index.cfm/S/176/N/1368/Vacuum_Coffee_Makers.htmUnfortuantely the gasket is  'out of stock'
Dave
<Snip>


HomeRoast Digest