I can't imagine nobody does. You might try Martin Diedrich... Brett On 4/28/07, True, Dennis W. FC1 (CVN69) wrote: <Snip> .com/ir12.html> <Snip> -- Cheers, Bretthttp://homeroast.freeservers.com
This is a multi-part message in MIME format. Hey Dennis, you could roast your whole stash in an hour with that baby! bob
That is one pretty baby! L.
Yeah, 24 lb roast capacity is some 'side biz' ;) Given that their home roaster starts at 3800, I'm guessing it's not cheep either. Probably the paint job that takes it over the edge! As for who has experience with one...http://sweetmarias.com/roastercomparisonchart.htmlAsk Tom! -F On 4/28/07, True, Dennis W. FC1 (CVN69) wrote: <Snip>
Hell's bells! I had several probemats for a Hewlett-Packard test set but couldn't do any roasting on it... -ro
This is a multi-part message in MIME format. Does any one have any experence with one of these? <Snip> Dennis AKA FC1(SW/AW) Dennis W. True Safety Dept USS Dwight D. Eisenhower (CVN 69) FPO AE 09532-2830 HG/DB and Z&D roasting in the IO "On station and on point 25 and counting down..."
This is a multi-part message in MIME format. you are correct!....I'm thinking of starting a lil side biz and I am looking at upgrading from the Z&D in to something a bit larger..... Dennis
This is a multi-part message in MIME format. Ahh I had forgotten that Tom had a Detrick. I know he roasts on a Probat... I keep forgetting about Ohio.
You are looking at probably 15 grand for that thing. their small one for home roasting runs about 3500 dollars. You'd probably be just as well using a RK drum setup. Lot cheaper, and you can still crank out multi pound batches in it. Not to mention there is a wealth of information on that here on the list. aaron
hey dennis, is the one you are going to mod for the homeroasters.org building contest? you go guy! ginny ---- "True wrote: <Snip>
Their home roaster looks pretty cool. Course you better be very serious about your roasting to buy a $4000 roaster.
If the Diedrich is in running condition now, modding it would be like installing an adaptor on your Maserati that will allow it to burn water. I wouldn't mind modifying one, however, to cause it to exist here! Of course, Jeffrey Pawlan might breathe on it to make it more efficient in the small batch sizes for the machine... Cheers -RayO, aka Ooa! Man, what are you waiting for? On 4/28/07, pchforever wrote: <Snip> -- "When the theme hits the bass, I dance the Jig!" - -Virgil Fox at the Mighty Wichita (ex- NYC Paramount) WurliTzer- 1976
PS- if you're not that serious about roasting, Why Roast? If you're only Half-Serious, get the Diedrich at the beginning so you won't ever have bother with the roaster again. If it's just a Thing, *$ has your coffee. Cheers -RayO, aka Opa! -with room.
True, Dennis W. FC1 (CVN69) wrote: <Snip> And it runs on house voltage, 110 Volts!
"And it runs on house voltage, 110 Volts!" Not to worry, if you have an electric range, you have "220v." Even without an electric range, clothes dryer or water heater, you likely have "220v." -ro On 4/30/07, George Birchard wrote: <Snip> -- "When the theme hits the bass, I dance the Jig!" - -Virgil Fox at the Mighty Wichita (ex- NYC Paramount) WurliTzer- 1976
Has anyone ever played with the Diedrich home roaster, or seen reviews on it?