HomeRoast Digest


Topic: Question about profile (107 lines)
1) From: MSMB
This is a multi-part message in MIME format.
I was about to try this profile that Ross sent to me.  But I thought you
could only program 3 stages on the i-roast I.  Perhaps it is different =
on
the I-roast 2.  If you can only program e stages, can someone suggest a
profile for coffee on the light side?  
From: homeroast-admin
[mailto:homeroast-admin] On Behalf Of Ross
Sent: Friday, April 27, 2007 6:57 PM
To: homeroast
Subject: Re: +oily beans
 
Yes, one cup of beans is overload for the I-Roast.  The I-Roast comes =
with a
1/2 cup scoop and the instructions say you can use up to two scoops, but =
I
can confirm that 1 cup is too much for the I-Roast.  Better to go with
somewhere between 1/2 cup and 3/4 cup.  Additionally, I can confirm that =
the
presets are very hot programs, so do as Barry suggested, try a program
similar to 360/5+00, 400/2+00, 380x3+00, 415x2+00 if your voltage is =
good
(steady 110v) it will hit 1st crack at about 7 minutes elapsed (5 on the
countdown timer)  and you will need to hit the cool button at about =
10+30
elapsed (1+30 on the countdown).  If you still have fast/hot/sour roasts =
you
will need to get a variac and control your voltage.  If you control the
voltage at 110v  and roast small quantities the I-Roast is a very nice
roaster.
Regards,
Ross


HomeRoast Digest