HomeRoast Digest


Topic: Homeroast Digest, Vol 5, Issue 3 (3 msgs / 99 lines)
1) From: sci
I have one Zass that is center supported on the bottom (and of course on the
top). You're correct that it keeps the cone burr from wandering around and
changing tolerances with the bottom burr. I have another Zass that is like
the one you complain about. It does wander.
Ivan
++++++++++++++++++++++++++++++++++++++++++
Date: Mon, 2 Jun 2008 08:58:05 -0500
From: "Matthew Price" 
Subject: Re: [Homeroast] Rust on grinder burrs
To: homeroast
Message-ID:
       
Content-Type: text/plain; charsetO-8859-1
The basic configuration is the same - straight through nesting cones -
but the Maestro's are much larger and better supported.  The zass
burrs' great flaw is that the upper burr doesn't have anything to
center it at the bottom.  In a perfect world the force of the grinds
would keep the burr evenly spaced all the way around, but in reality
it has a tendency to spit chunks from one side or the other when that
pressure gets momentarily out of balance.
On Sat, May 31, 2008 at 1:31 PM,   wrote:
<Snip>
same
<Snip>
Homeroast mailing list
Homeroasthttp://www.homeroasting.com/gallery/main.php?g2_itemIdx20">http://lists.sweetmariascoffee.com/listinfo.cgi/homeroast-sweetmariascoffee.comHomeroast community pictures -upload yours!) :http://www.homeroasting.com/gallery/main.php?g2_itemIdx20

2) From: Terry McVay (rr)
I also have a "wandering" Zass and have tried to think of a fix for it.. any
thoughts?

3) From: Brian Kamnetz
Ivan,
Is the center-supported Zass a knee grinder? (Longer than wide, rather
than square....)
Brian
On Mon, Jun 2, 2008 at 4:26 PM, sci  wrote:
<Snip>
Homeroast mailing list
Homeroasthttp://www.homeroasting.com/gallery/main.php?g2_itemIdx20">http://lists.sweetmariascoffee.com/listinfo.cgi/homeroast-sweetmariascoffee.comHomeroast community pictures -upload yours!) :http://www.homeroasting.com/gallery/main.php?g2_itemIdx20


HomeRoast Digest