HomeRoast Digest


Topic: E61 Group Gaskets - Update (25 lines)
1) From: Frank Cascarano
Thanks for all the suggestions.  Unfortunately, none of them worked.  But, I
wanted to pass along what did work in the hopes that it will save someone
the aggravation that I had to deal with.
On the espressoparts.com website there is a warning about home
("semi-commercial") E61 group heads not being true E61 and needing a
slightly smaller diameter gasket.  So, I purchased their W_556 gasket (1 mm
smaller in diameter) and installed it in about 10 seconds.  Problem solved.
(My machine is a Quick Mill Andrea Premium.)
This is from their website:
"Models such as the Expobar, ECM Giotto and Isomac claim to have an E-61
group head, and for the most part they are, but we have found that the
outside diameter of these gaskets are too large, and recommend this other
gasket instead: W_556  "
Thanks again,
Frank
Homeroast mailing list
Homeroasthttp://www.sweetmariascoffee.com/gallery/main.php?g2_itemIdx20">http://lists.sweetmariascoffee.com/listinfo.cgi/homeroast-sweetmariascoffee.comHomeroast community pictures -upload yours!) :http://www.sweetmariascoffee.com/gallery/main.php?g2_itemIdx20


HomeRoast Digest