HomeRoast Digest


Topic: Alps roaster/hottops roaster (26 lines)
1) From: NOEL HONG
Thanks for the feedback regarding the Alps.  Ken, I ended up building a vent 
box similar to yours.  Just a little bit larger (20x20x20") with the 
bathroom fan mounted to the top of the box. A little cumbersome due to the 
size.  But I figure the roaster (Alps or HotTops and HWP will total fit 
inside the box.  Once the HotTops roaster dimensions are finalized I will 
build a sliding floor tray and eventually a table to mount the whole 
thing(right now it's sitting on top of the dryer).  I have a relatively 
large pile of scrap lumber. So,far only ~$15 for the fan & 3" vent tubing.  
Talked to someone @ Baritza yesterday.  Sounds like the hot HotTops & UL 
listing are delaying release. Suggested a simple perforated screen offset 
from the roaster. The designers apparently are considering something with 
more shelf appeal.  They are hoping for a pre-Christmas shopping season 
release. Units will be available only from retailers.
<Snip>
Noel V. Hong
email: nhong32590
Join the world’s largest e-mail service with MSN Hotmail. http://lists.sweetmarias.com/mailman/listinfo/homeroast">http://www.hotmail.comhomeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast


HomeRoast Digest