HomeRoast Digest


Topic: modifying the Mazzer hopper. (10 lines)
1) From: Isabel1130
If I were going to try and cut the Mazzer hopper I would do it from the 
bottom rather than the top.  The screw that holds the hopper tight in the 
machine is not essential as long as you are not trying to pick the grinder up 
by the hopper.  I think you could take off an at least half an inch by 
cutting on the bottom.  Isabel
homeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast


HomeRoast Digest