HomeRoast Digest


Topic: Priming (4 msgs / 63 lines)
1) From: jim gundlach
Dan,
    As long as the tank is full, it should pull water in by itself.  It 
will work easier if you open the steam valve.  However, since the pump 
relies on water for lubrication, you should not try to run it to get 
the water in for more than a minute.
Jim Gundlach
On Saturday, January 11, 2003, at 04:11 PM, Dan White wrote:
<Snip>
homeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast

2) From: Dan White
Need a little help please.  How does one prime a Gaggia Coffee espresso maker?
Dan
homeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast

3) From: Dan White
Thanks!  Opening the steam valve worked like a charm.
jim gundlach wrote:
<Snip>
homeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast

4) From: Ed Needham
Turn on pump with steam valve open until water squirts from the steam nozzle.
Ed Needhamhttp://www.homeroaster.comed
****************************************
**********************************************


HomeRoast Digest