HomeRoast Digest


Topic: popper 2 Electrical Question (2 msgs / 36 lines)
1) From: 2D Softhome
Hello HomeRoasters,
Just  took my popcorn popper apart, wanting to install a switch to cut
the heat off for cooling but, after looking at it I can't decide which
wire  to  cut  and  install  a  switch on. Guess, I'm not a electrical
person. Any help would be appreciated.
TIA
Paul.....
HomeRoaster by Choice
Research-aholic by Nature
homeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast

2) From: Ben Treichel
The white one (return line). While you're in there take the fan off, and 
wire around the thermal fuse and thermal switch. You will also be able 
to see that the white wire (I'm presuming that the color code is the 
same (unsafe to assume)) is after the thermal fuse & switch.
If you don't wire around the thermal switch it could open while you're 
trying to control he power.
Ben
2D Softhome wrote:
<Snip>
homeroast mailing listhttp://lists.sweetmarias.com/mailman/listinfo/homeroast


HomeRoast Digest