HomeRoast Digest


Topic: Used Mazzer arrived! -- ... oops, it *is* the Auto, says right on the side (2 msgs / 49 lines)
1) From:
Ted said -- "Are you sure you don't have an 'autofill' version? What you are
calling the 'fingerguard' may be the microswitch that detects a full doser."
By golly he's right, that's what I have, says "SUPER JOLLY AUT." right on
the side, kinda ignored the "aut.", didn't know what aspect/feature it
referred to.  Wow.  So, I can let the thing run without fear of over-filling
it ... way cool.
By the way, went to the hardware store, and got some metric bolts ("M5 0.8"
[5 mm], 40mm long) that fit the adjustment ring perfectly.  Two in opposing
holes (or almost opposing; it's 5 holes not 6, just assumed it was
symmetric) and it's very easy to turn.  If I can't find the "correct" handle
(if it exists), I'll mount one or two bolts in handles.  Found some cute
little "table leg" blanks, middle section works nice for a pre-turned
handle -- now to find a friend with a drill press. ;)
ABTW (also by the way), a "4" setting for my Swiss One-Cup is very nice ...
considering a "3" is factory-marked, guessing that's the espresso setting.
Didn't realize I was using so fine a grind for my coffee... interesting.
Still going "oh boy oh boy oh boy" inside ... deferred gratification *can*
be satisfying!
-- Tod

2) From: miKe mcKoffee


HomeRoast Digest